Covidien Nellcor OxiMax N-560, Service Manual

Page: 29 / 158

Performance Verification
N-560 Service Manual
19
Pulse Tone Volume Control
1. When a valid pulse is acquired, press the
Adjust Up
button and verify
that the sound level of the beeping pulse tone increases.
2. Press the
Adjust Down
button and verify that the beeping pulse tone
decreases until it is no longer audible.
3. Press the
Adjust Up
button to return the beep volume to a comfortable
level.
Pulse Oximetry Functional Tests
These tests utilize the pulse oximetry functional tester (SRC-MAX) to verify
the performance of the N-560 pulse oximeter.
All of these tests should be done in sequence.
1 — DOC-10 Cable Connector 6 — % Modulation Select Button
2 — Red LED Drive Indicator 7 — % SpO
2
Select Button
3 — Not Used For N-560 8 — Light Level Selection Button
4 — Not Used For N-560 9 — Pulse Rate Selection Button