Covidien Nellcor D-YS, Instructions For Use Manual

Page: 3 / 88

3
en
SpO
2
Sensor
Multisite Reusable
This device is not made with natural rubber latex or DEHP.
Directions for Use
Indications/Contraindications
The Nellcor™ SpO
2
Sensor Multisite Reusable, model D-YS, is indicated for use when continuous
noninvasive arterial oxygen saturation and pulse rate monitoring are required for patients
weighing greater than 1 kg.
The SpO
2
Sensor is applied to the sensor site using Nellcor adhesive wraps, models ADH-A/N
(adult/neonatal) and ADH-P/I (pediatric/infant), or Nellcor disposable foam wraps, models FOAM-
A/N and FOAM-P/I. Nellcor adhesive and disposable foam wraps are intended for single patient
use only. Additionally, the SpO
2
Sensor can be used with D-YSE (SpO
2
Ear Sensor) or D-YSPD
(Pediatric SpO
2
Sensor Reusable).
>1 – <3 kg 3 – 40 kg >40 kg
ADH-A/N ◆ ◆
FOAM-A/N
◆ ◆
ADH-P/I ◆
FOAM-P/I ◆
D-YSE ◆
D-YSPD ◆
Identification of a substance
that is contained or present
within the product or
packaging.
Identification of a substance
that is not contained or
present within the product
or packaging.
IP22
Protected against access to
hazardous parts with a finger and
protected against vertically falling
water drops when sensor tilted
up to 15°.