Covid EHB-200, User Manual, Page: 6 / 11

EHB-200
USER MANUAL
v1.0
1723 W. 4th Street Tempe Arizona 85281
P
: 800.638.6104 |
F
: 480.966.6728 |
E
: sales@covid.com | www.covid.com
5. Operation Controls and Functions
5.1 Transmitter Panel
Page 5
SERVICE
RS-232
TX RX
HDMI OUT HDMI IN IR IN IR OUT
DC 24V
Name Function Description
Power LED Red LED indicates when the transmitter is powered.
SERVICE port Firmware update port.
DC 24V DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter or receiver is
powered by the 24V/1A power adapter, the other does not need a power supply.
HDBT OUT RJ45 connector for connecting the HDBT IN port of receiver with CAT 5e/6 cable.
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
• Solid: Transmitter and Receiver are in good connection status.
• Flashing: Transmitter and Receiver are in poor connection status.
• Dark: Transmitter and Receiver are not connected.
Data Signal Indicator
(on the right side of the
HDBT OUT port)
• Solid: HDMI signal with HDCP.
• Flashing: HDMI signal without HDCP.
• Dark: No HDMI signal.
HDMI OUT HDMI loop output for display.
HDMI IN HDMI source input.
IR IN IR port input for receiving the signal of IR remote.
IR OUT IR port output for control of source device. This IR output signal is from IR IN port of
receiver.
RS-232 3-pin pluggable connector for RS-232 command transmission. The RS-232 com-
mand will pass-through from transmitter to receiver or receiver to transmitter.