EHB-120
USER MANUAL
v1.0
1723 W. 4th Street Tempe Arizona 85281
P
: 800.638.6104 |
F
: 480.966.6728 |
E
www.covid.com
Page 5
Operation Controls and Functions
5.1 Receiver Front and Rear Panel
1. Power LED:
System power indicator.
2. DC 24V:
Connect 24V/1A adapter to AC wall outlet for power supply.
3. HDBaseT In:
HDBaseT signal input port. Connect HDBaseT transmitter with a category cable.
4. HDMI Out:
HDMI output port.
5. Audio Out:
Analog audio output from HDMI signal.
6. Mode:
The Update Mode and the RS-232 mode selector.
•
Update Mode:
When the dial switch is set to update, port 7 is used to update or control the device.
•
RS-232 Mode:
When the dial switch is set to RS232, port 7 is used for RS232 pass-thru
communication.
7. RS-232:
RS232 communication port that passes through from transmitter to receiver and receiver to
transmitter.
8. Connection Signal Indicator Lamp
•
On (Solid):
The Transmitter and Receiver are communicating.
•
Flashing:
The Transmitter and Receiver are not communicating properly.
•
Off:
The Transmitter and Receiver are not connected by a category cable.
9. Data Signal Indicator Lamp
•
On (Solid)
The HDMI signal is carrying HDCP.
•
Flashing:
The HDMI signal is not carrying HDCP.
•
Off:
No HDMI signal.
