1723 W. 4th Street Tempe Arizona 85281
P
: 800.638.6104
|
F
: 480.966.6728
|
E
|
www.covid.com
USER MANUAL
Page 4
1X4 HDMI 2.0 (18Gbps) Splitter - DH14-200
Operation Controls and Functions
1. Power LED:
This blue LED illuminates when the device is connected to the power supply.
2. IN LED:
This blue LED illuminates when a Source is connected to the device.
3. OUT LED:
These blue LEDs illuminate to indicate which HDMI outputs are connected to an active display.
4. SERVICE:
Firmware update use only.
5. EDID STD:
When in ‘STD’ mode, the unit will use its own built-in EDID settings. In this mode, the video out-
put will be set to 1080p@60Hz and the audio output to LPCM 2CH Stereo. Use this mode if there are display
problems in TV Mode.
EDID TV:
When in ‘TV’ mode, the unit will read the EDID settings of the display device connected to HDMI
OUT 1. If it detects a 4K2K capable EDID setting, it will transmit the signal in that format to all outputs. If no
4K2K capable EDID is detected, then the unit will output the best resolution that all displays can support.
6. HDMI OUT 1~4:
Connect each of the HDMI outputs to an HDMI display for simultaneous HDMI distribution,
or cascade the output to another transmitter to extend the operating distance.
7. HDMI IN:
Connect the input port to the HDMI output of your source device such as a DVD player or set-top
box with an HDMI cable.
8. DC 5V:
Plug the 5V DC power supply into the unit and connected the adapter to an AC outlet.
