Record
1.
Keep the micro SD card in card slot.
2. Select the video resolution you prefer on the
back panel, and then close the rear cap.
3. Press and hold button one until vibrator
shakes then release. Wait 2 seconds, two
indicators turn on—one is red and two is green.
The camera now is in “standby mode.”
Attention:
1.
The camera will turn off automatically if the
camera is idle for 5 minutes.
2. It will start to record automatically if set
AutoRecord = Y,
3. Press button two shortly, the vibrator
shakes; then the green indicator flashes. The
camera is now recording.
4.
Press button two again. When the green
indicator stops flashing and vibrator shakes
twice, the camera stops recording, thus saving
video file automatically.
5. Press and hold button one in standby mode
until vibrator shakes, the camera turns off.
