Attach Base Plate
rxDD
to Support Legs
rxEE
using four Carriage Bolts, Washers
and Acorn Nuts.
Attach Pivot Arm
rxGG
to Main Body
rxEE.
On each side, insert Hex Cap
Screw
rxA
through the Metal Washer
rxB
and Metal Spacer
rxC.
Insert into
the Pivot Arm Tab (the spacer will fit into the hole in the tab), then through
the plastic washer and into the threaded hole in the main body.
Plastic
Washer
1
2
Make sure the square part of the
Carriage Bolt head seats into the
square hole in the base.
!
