OPERATION
After reading all the instructions, make sure that all the fireplace controls are in the OFF position.
Plug the fireplace into a 15A/120V outlet.
Operation with The Control Panel
The controls are located at the right of the heater outlet.
: Press this button to turn ON the fireplace. The unit will beep. Press again to turn off the fireplace and
the fan will continue to work for 60 seconds without heat.
: Press this button to change flame color. The unit will beep. Press once is orange color. Press twice
is orange and blue color. Press third is blue color.
: Press this button to change flame effect. The unit will beep. Press again to decrease the flame
intensity. There are 6 light intensities for your selection. The flame optics will go lower under the
sequence of 6,5,4,3,2 and 1. Pressing the button again will stop the flame effect.
: Press this button to set the temperature. The unit will beep. Press this button to the desired temperature.
When desired ambient temperature is reached, the heater will automatically stop heating. When the
ambient temperature drops below the desired temperature 2°C, the heater will resume heating.
Operation by The Remote Control
: Press this button to turn ON the fireplace. The unit will beep. Press again
to turn off the fireplace and the fan will continue to work for 60 seconds
without heat.
: Press this button to toggle between the two temperature scales. The
corresponding Celsius (C) or Fahrenheit (F) LED indicates the current
setting.
: Press this button for timer function. The letters '0H' to '8H' will appear on
the LED screen. '0H' means there is no set running time and heater will run
continuously. The letters '1H' to '8H' mean the number of hours that the heater will
operate before shutting off.