2
Touch Start and close the door within four seconds.
TIP: To incorporate a cycle option to the wash cycle, touch
Options before touching Start. Refer to
Set Cycle Options
on
page 4. To change the cycle after touching Start, touch
Cancel.
Set Cycle Options
Cycle options add certain features to cycles to meet
specific
wash needs.
1
Select the desired wash cycle.
2
Touch Options.
3
Touch Options multiple times to scroll through cycle
options.
4
Touch Enter to select the desired option. Then, continue to
touch Enter until the desired setting appears in the display.
5
Touch Options again to select additional options.
6
Touch Start and close the door within four seconds.
Cycle Options
OPTION
DESCRIPTION
Delay Start
Delays start of wash cycle by 1–12 hours
in 1-hour increments.
High Temp
Wash
Increases the main wash water
temperature and extends the cycle time
by 10 minutes.
Sani Rinse*
Increases the rinse water temperature
and extends the rinse time.
Extended Dry
Extends the dry time by 30 minutes.
Extra Dry
Increases the rinse water temperature
and extends the dry time by 30 minutes.
Top Racks
Only
Directs wash functions to upper and
middle racks only.
*Sanitizes per NSFIANSI standard 184 for residential
dishwashers.
Interrupt a Cycle
To interrupt a cycle:
1
Open the door.
2
To restart the cycle, touch Start and close the door within 4
seconds.
Cancel a Cycle
To cancel a cycle:
1
Open the door.
2
Touch Cancel and follow the instructions on the display.
Set User Options
1
Touch Cancel twice.
2
Touch and hold Options for approximately 10 seconds until
"User Set Up" appears on the display.
3
Touch Options multiple times to scroll to the desired option.
4
Touch Enter to scroll or to select the desired setting.
5
Touch Cancel to exit user setup.
DW2450 and DW2450WS Service Manual
Controls and Operation
SET A WASH CYCLE (continued)
service.subzero.com
828019 REV. A 02/2019
4
