Cove 51000-307, User Manual

Page: 29 / 36

26
(855) 268-3669
TESTING SENSOR
CHANGING BATTERIES
To test a Glass Break Detector’s connection to the panel, tap Settings > Sensors >
Glass Break > (select sensor) > Test > Test Sensor.
release the test button. A signal will be sent to the panel to notify you the sensor has tested
successfully. See manufacturer information for more ways to test the Glass Break sensor.
Glass Break Detectors require two AA batteries. Rotate the detector counterclockwise one quarter
turn to remove it from the mounting plate. Use a Phillips screwdriver to remove the screw found on the
detector, properly align the back cover, replace the screw, and place the sensor back on the mounting
plate by rotating the detector one quarter turn clockwise until seated.
Press Test button briefly (1/2 second) until the Green LED turns ON. Immediately
To replace the battery (whenever a low battery alert has been received): Twist the glass
break sensor in a counterclockwise motion about 1/4 of a turn to remove the unit from the
mounting puck. Use a #1 Phillips screwdriver to remove the screw. Set screw aside in a safe
place. At the two slots atop the unit, use a 1/8” Flat blade screwdriver to gently pry open
the case.
Remove the two old AA Alkaline batteries. Note: ALWAYS replace both batteries at the same
time. Ensure correct orientation is observed while inserting the two new Vinnic AA Alkaline
batteries or equivalent. When inserting the batteries in the compartment, always match the plus
(+) sign on the battery with the flat metal side of the compartment and the minus (
‐
) sign on the
battery with the spring side of the compartment.
Replace the cover by inserting the bottom case on to the top case. IMPORTANT: The bottom
case has only one orientation so make sure the Test Button and the screw mounting hole line
up with the top case. After replacing the batteries it is recommended that you test the sensor to
make sure it works properly.
ADDITIONAL INFORMATION
For more information, see the enclosed documents or visit www.covesmart.com/manuals