
▲
Talkaround
You can continue to communicate when your repeater is not operating, or when your radio is out of the repeater’s
range but within talking range of other radios. This is called “talkaround”.
Procedure:
Press the programmed Repeater/Talkaround button to toggle between talkaround and repeater modes.
OR
Follow the procedure below.
1.Press
to access the menu.
2.Press
/
to Utilities and press
to select
3.Press
/
to Radio Settings and press
to select
4.Press
/
to Talkaround and press
to confirm or press
to cancel.
5.After confirmation, the display shows “Talkaround On” OR “Talkaround Off”
6.Press
or wait the presetting time to exit the menu state.
The Talkaround setting is retained even after powering down.
▲
Monitoring Features (Analog)
□
Monitoring a Channel
Use the Monitor feature to make sure a channel is clear before transmitting by listening for activity on the channel.
Procedure:
1. Press the programmed Monitor button and listen for activity. The monitor icon appears on the display.
2. If you hear activity on the channel the channel is busy. If you hear “white noise” on the channel the channel is free.
▲
Advanced Features
Radio Check
If enabled, this feature allows you to determine if another radio is active in a system without disturbing the user of that
radio. No audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or Ids.