background image

 

 

Instruction Manual 

                       

CU450-2/CU460-2 

FM Portable Radio 

 

Thank you for purchasing a 

COVALUE

 two-way radio. This simple to use radio adopts the latest 

advances in technology, providing reliable communication in today’s demanding communication 

environment.  

 

Notice to the User: 

·

  Please read this instruction manual before operating this radio.   

·

  It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere 

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while 

parking at a gasoline service station; or any area where radio communication is prohibited 

(such as a hospital or a airport.) 

·

  It’s prohibited to operate the radio without permission in areas where the government laws 

prohibit radio communication. 

·

  Please don't expose the radio to direct sunlight for a long time; don't place the radio near any 

heating devices, either. 

·

  Please don't put the radio in extremely dusty, moist humid areas or unstable surfaces. 

·

  Only qualified personal, with proper tools and instruments are allowed to service and repair the 

radios, do not disassemble the radio by yourself to avoid damages. 

 

 

 

 

 

This equipment can be used in member states of the European Union once 

the corresponding administrative licence is obtained. 

DECLARATION OF CONFORMITY 

SHENZHEN COVALUE COMMUNICATIONS CO.,LTD. as manufacturer of the product 

two way radio, declares that the said product complies with the essential requirements 

established in article 3 of the Council of Europe Directive 1999/5/CE, dated 9th March, 

1999.

SHENZHEN COVALUE COMMUNICATIONS CO., LTD. 

   

Summary of Contents for CU450-2



























Reviews: