COVAL • 26120 Montélier • France • Tél : 00 33 (0)4 75 59 91 91 • E-Mail : [email protected]
2
v 03
Dimensions and characteristics may be modified without notice.
Electronic vacuum switch PSA100C
®
To change this adjustment, push “+/-” keys until the
requested value is displayed.
4 Locking / Unlocking
The locking of the settings guarantees that they can-
not be changed by mistake.
To activate the locking, push simultaneously and during 3
seconds the “mode” and the “-” keys.
is displayed in order to show that the locking is
activated.
To deactivate the locking, push simultaneously and
during 3 seconds the “mode” and the “-” keys.
is displayed in order to show that the locking is
deactivated.
5 180° display rotation
To rotate the display push the “+” and “-” keys during 3
seconds at least.
6 Factory settings
To reprogram the factory settings, push the “mode” and
“+” keys during 5 seconds.
is displayed.
7 Preset values
H1 : 75
h1 : 10
Output NO
H2 : 65
h2 : 10
Output NO
8 Tightening couple
Manual mounting.
Do not use tools.
LC
UC
PO
Maintenir
3 sec.
Maintenir
3 sec.
h2
10
+
-
+
-
nc
no
M
-
UC
LC
PO
Maintenir au
moins 3 sec.
Maintenir au
moins 5 sec.
+
-
M
-
M
+
10
Attendre
5 sec.
After 5 seconds, the
chosen value registers
automatically and the
screen returns to the
vacuum display.
To adjust output 2
configuration, push
the “mode” key.
To change this adjust-
ment, push “+/-” keys.
NO or NC are
displayed.
or