Coustic D-block Owner'S Manual Download Page 12

TROUBLE SHOOTING

1. No power:

 Verify that the Ground, +BATT and remote are securely attached to the amp,the  

connection at the + terminal of the battery is secure, the remote turn-on is securely fastened to the 

source unit and that the in-line fuse at the battery is good as well as the fuse on the amp. If fuses are 

blown, replace them and attempt to power the amp back on. If fuses continue to blow, please see an  

authorized dealer. To confirm that the amp is getting power at the +BATT and remote, use a digital  

multi-meter set to DC voltage, attach the negative terminal of the meter to the ground and the positive 

to the +BATT and then check the remote. The remote and the +BATT should have 11-15volts. If the amp 

has ground, +BATT and remote voltage and will not power on, please visit an authorized dealer or call the 

technical support number listed below for further assistance.

2. Power light on, no output:

 Turn the audio system off (source unit and amplifier), check 

output signal connections from the source unit and input signal connections at the amp. Remove speaker 

wires and test for opens or shorts of speakers with a digital multi-meter set to the impedance setting. 

Reconnect the speaker wires and test the system. If there is still no output, visit an authorized dealer or 

call the technical support number listed below for further assistance.

3. Amp turns on and shuts off:

 Turn the audio system off (source unit and amplifier). 

Remove the speaker wires and test for opens or shorts of speakers with a digital multi-meter set to the 

impedance setting. Gently push on the speaker with your ear close to it. If it sounds scratchy then  

replace the speaker or consult a local dealer. Carefully touch the amp for temperature. If it is  

extremely hot then the amp is in thermal protection and needs to cool down. If thermal protection contin-

ues to be a problem, see an authorized dealer or call the technical support number below.

4. No sound from one side:

 Check the speaker connections, input connections, balance 

control on the source unit, and then check the speakers for shorts with the digital multi-meter.

5. Low sound from both radio and CD:

 Check the radio’s fader control and the 

amplifier’s input sensitivity.

6. Amplifier shuts down after long play times:

 If the light is turned off, then the 

amp is probably in thermal protection due to poor ventilation. If the amp has good ventilation then check 

the speaker impedance to verify that it is above the suggested load rating. With it running,verify that you 

have more than 11volts at the +BATT portion of the amp and that you have 4 gauge power cable and the 

proper fuse rating at the fuse holder near the vehicle battery.

Summary of Contents for D-block

































Reviews: