Missing A Part?
No Need To Go Back To
The Store!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
SHOULD YOU NOT LOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECT ALL
PACKING MATERIAL FOR ANY SMALL PARTS THAT MAY HAVE BECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORE RETURNING THE ITEM TO THE STORE.
PLEASE PROVIDE THE FOLLOWING INFORMATION:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT
TO THE RETAILER.
PAGE 2 OF 2
STOP
DON’T RETURN TO STORE!
FIGURE 2
FIGURE 3
FIGURE 4
Step 2:
Fasten the center connector with ring (#4) to the middle
of the legs (#2) by using bolts (#6) and washers (#8).
Keep the bolts loose. See Figure 2.
Step 3:
Fasten the center connector with ring (#4) to the supports
(#3) by using bolts (#7) and washers (#8). See Figure 3.
Make sure that all of the bolts have been tightened
completely, and then cover them with bolt caps (#9
and #10).
NOTE:
The arrow mark on the center connector with ring (#4)
must coincide with figure 2 to ensure proper assembly.
Step 4:
Turn the table to its upright position. See Figure 4.
Cleaning and Maintenance
•
Wash frame parts with mild soap and water, rinse
thoroughly, and dry frame completely. Do not use
bleach, acid, or other solvents on the frame parts.
•
Wash glass with mild soap and water, rinse thoroughly,
and dry glass completely.
•
Please inspect and tighten all bolts and fasteners on
a regular basis to ensure proper performance and
safety of your table.
•
When moving the table, remove the umbrella and lift
the table. Do not drag.
•
We recommend the use of furniture covers when not
in use.
•
In order to prolong the life and beauty of your table,
we recommend it be stored in a dry and protected
area during off season periods.
•
Tempered glass has been used for increased strength
and safety of your table. However, during windy
conditions the umbrella should be lowered and/or
removed.
2
2
2
2
4
3
3
2
2
2
2
4
3
3
6
8
9
7
7
8
8
10
10
25
#6 BOLT M6*25
#7 BOLT M6*25
25
NOTE:
To use an umbrella with this table, please remove the
plastic center plug and put the umbrella pole through the
table top and center connector ring.
