background image

PAGE 2 OF 2

Cleaning and Maintenance

    Wash frame parts with mild soap and water,

    rinse thoroughly, and dry completely. Do not 

    use bleach, acid, or other solvents on the frame 

    parts.

    Wash glass with mild soap and water, rinse

    thoroughly, and dry completely.

    Inspect and tighten all bolts and fasteners on a 

    regular basis to ensure proper performance and

    safety of your table.

    When moving the table, lift

.

 Do not drag this 

    table.

    We recommend the use of furniture covers 

    when not in use.

    In order to prolong the life and beauty of your 

    table, we recommend that it be stored in a dry

    and protected area during off season periods.

Step 4:

Turn the table to its upright position. See Figure 4.

FIGURE 4

FIGURE 3

FIGURE 2

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

Call Toll  Free:

TEL: 1-877-539-7436

FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU 

HAVE ALL OF THE PARTS LISTED.

IF YOU DO  NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 

PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED DURING SHIPMENT.

IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 

PARTS ARE MISSING OR DAMAGED, CALL THE HELP  LINE AT 

1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.

PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:

1-MODEL NUMBER OF THE PRODUCT.

2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS 

   LIST.

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS 

PRODUCT TO THE RETAILER.    

 

Step 2:  

Fasten the legs (#2) to the underside of the table 

top (#1) rim by using bolts (#4) and washers (#6). 

Keep the bolts loose. See Figure 1 and Figure 2. 

Step 3:

Fasten the center connector with ring (#3) to the 

middle of the legs (#2) by using bolts (#5) and 

washers (#6). Make sure that all of the bolts have

been tightened completely and cover them with

bolt caps (#7). See Figure 3.

Reviews: