Fig. E
Fig. F
PAGE 5 OF 6
STOP DO NOT RETURN TO STORE!
Step 10:
Insert the front/rear canopy braces (#11) into the
sleeves on the canopy (#28).
See Fig. E – Step 3.
Step E - 4:
Insert the tube ends on the front and rear canopy
braces (#11) into the side canopy braces (#10).
See Fig. E – Step 4.
Step E - 5:
Velcro the canopy (#28) to the side canopy
braces(#10). See Fig. E – Step 5.
Step 9:
Slide the canopy/frame connectors (#23) onto
the side canopy braces (#10). In the pre-drilled
holes, secure them together by using screws
(#18). Make sure that the teeth on the
canopy/frame connectors are facing towards the
inside of the frame.
See Fig. E – Step 1 and Step 2.
28
23
24
23
24
1
Step 13:
Fasten the canopy/frame connectors (#23) to
the adjustable teeth on the top cross beam w/
adjustable teeth (#1) by using a plastic screw
(#24). Repeat this procedure for both sides.
Step E - 1
Step E - 3
Step E - 5
Step E - 2
23
23
18
18
10
10
10
10
11
28
Step E - 4
10
10
11
11
28
28
11
V-3
