background image

PAGE 6 OF 6

Special Warnings

1. The user of this swing should always inspect it before each use.

2. It is essential to place this swing on level ground and not less than 6 feet away from any obstruction, such as

    fences, garages, houses, overhanging branches, laundry lines, or electrical wires.

3. Check the tightness of all of the nuts and bolts on a regular basis.

4. Make sure that the suspension springs are properly secured before each use.

5. Always remove the canopy in heavy wind conditions; otherwise, the swing may tip over and cause damage to 

    its parts.

6. The manufacturer will not accept responsibility for unauthorized repairs or modifications to the swing or its parts.

7. Oil all of the metal parts that move regularly.

8. The weight limit is 750 lbs.

Cleaning and Maintenance

•  Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use 

   bleach, acid, or other solvents on the frame or fabric parts.

•  The cushions and canopy may be surface washed with mild soap and water if necessary. Commercial foaming 

   upholstery cleaner may also be used. Rinse well and hang to dry.  Do not machine wash or dry.

•  We recommend the use of furniture covers when not in use.

•  Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of 

   your swing.

•  In order to prolong the life and beauty of your 

swing, we recommend that it be stored in a dry and protected 

   area during off season periods.

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

For further assistance, 

please visit us at 

[email protected]

Call Toll  Free:

TEL: 1-877-539-7436

FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT 

YOU HAVE ALL OF THE PARTS LISTED.

IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 

PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED DURING SHIPMENT.

IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 

PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 

1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.

PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:

1-MODEL NUMBER OF THE PRODUCT.

2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS 

   LIST.

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS 

PRODUCT TO THE RETAILER.    

 

Fig. G

Step 14:  

Place the cushions (#30 and #31) onto the seat 

assembly (#8). Secure the cushions to the 

seat assembly by using the velcro straps. 

To assure stability, double check that all of the

bolts have been completely tightened.

Warning:

To avoid danger of suffocation, keep plastic 

bags or small parts away from babies and 

children. 

Warranty

 This product is covered by Courtyard Creations Inc.'s one–year limited warranty.

 Proof of purchase (dated register receipt) is required for warranty claims. 

 It remains the customer’s responsibility for freight and packing charges to and from the service center.

STOP    

DO NOT RETURN TO THE STORE!

30

30

31

31

31

30

V-3

Summary of Contents for RUS498G













Reviews: