Note:
The labelled arrow marks on the rear cross
brace (#5) should be facing upwards.
Step 3:
Fasten the
top cross beam w/adjustable teeth
(#1) to the
front and rear upright supports
(#2 and #3) by using bolts (#15), washers (#21),
and steel nuts (#26). Do the same procedure
for both sides. See Fig. A – Step 3.
Step 5:
Fasten the rear cross brace (#5) to the rear
upright supports (#3) by using bolts (#17),
washers (#22) and plastic nuts (#27). Tighten
all of the plastic nuts and bolts.
See Fig. A – Step 5.
PAGE 3 OF 7
Step 1
Step 2
Step 3
Step 4
Step 5
Fig. A
Step 1:
Fasten the front and rear upright supports
(#2 and #3) at the top by using bolts (#15),
washers (#21), and steel nuts (#26). Do the
same procedure for both sides. Keep the bolts
loose. See Fig. A – Step 1.
Do not tighten bolts
after step 1, fasten
all bolts after step 5.
Step 2:
At both ends, insert the assembled upright
supports (#2 and #3) into the top cross beam
w/adjustable teeth (#1). See Fig. A – Step 2.
Step 4:
Fasten the lateral cross brace (#4) to the upright
supports (#2 and #3) by using bolts (#16) and
washers (#22). Do the same procedure for both
sides. See Fig. A – Step 4.
STOP DON’T RETURN TO STORE!
2
2
2
1
1
32
32
15
15
21
21
21
21
26
26
27
27
22
22 16
17
22
22
33
5
33
3
3
2
3
2
4
4
3
2
3
3
3
2
3
3
ASSEMBLY (Note: For all nuts and bolts
fastening, always use a washer (#21, #22 or #23)
between the tube and bolt or the tube and nut.)
