Step 3:
Fasten the swing bars of the arm assembly to the bottom
frame (#4) by using bolts (#9), washers (#10), and plastic
nuts (#11). Keep the bolts loose. See Figure 3.
Step 4:
Place the right arm (#1) onto a non-abrasive surface, such
as a carpet. At the front of the glider, fasten the seat
assembly (#5) to arms (#1 and #2) by using bolts (#8).
Keep the bolts loose. See Figure 4.
Step 2:
Place the arm assembly on to the bottom frame (#4). Make
sure that the higher tube on the bottom frame (#4) is facing
towards the front of the glider. See Figure 2.
#9 BOLT M6*55
FRONT
HIGHER
TUBE
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
PAGE 2 OF 3
V-3
55
#8 BOLT M6*15
STOP
DO NOT RETURN TO THE STORE!
9
5
1
8
8
2
9
4
1
2
4
11
11
10
10 10
10
10
10
10
10
15
Step 5:
At the back of the glider, fasten the seat assembly (#5) to
arms (#1 and #2) by using bolts (#7). Make sure that
all of the bolts have been tightened completely.
See Figure 5.
#7 BOLT M6*35
35
7
5
1
2
