ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
RTS018N
COURTYARD CREATIONS INC.
FIGURE 1
PARTS LIST
PART
NO.
MATERIAL CODE
1
2
3
4
5
6
RTS018M-CS01-3
17C40A0719001YX
17FA05040301-YX
18000C23001
17KAA0101----Y4
17KAB1101----Y4
RTS018M-CS01-2
62RUS0236I101
RTS018N-CS04-1
RTS018N-CS11-1
17C40A0710001YX
RIGHT ARM
BOLT M6*55
BOLT M6*15
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
HEX. KEY WRENCH 4MM
NUT WRENCH 10 & 13MM
LEFT ARM
CROSS BRACE
BOTTOM FRAME
SEAT ASSEMBLY
BOLT M6*30
BOLT M6*35
1
1
1
1
1
2
13
12
11
10
9
8
7
4
17C40A0705001YX
4
18
6
17C40A0712001YX
2
1
1
PART
Q’TY
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
PAGE 1 OF 3
V-3
STOP
DO NOT RETURN TO THE STORE!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until the
glider
i
s completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
ARM
ASSEMBLY
1
1
3
3
2
2
#6 BOLT M6*30
R
L
30
6
10
11
Step 1:
Insert the right and the left arms (#1 and #2) into the cross
brace (#3) on both sides. Fasten them together by using
bolts (#6), washers (#10), and plastic nuts (#11). Keep the
bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on arms (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
