PAGE 2 OF 3
STOP
DON’T RETURN TO STORE!
STEP 2:
Place the arm assembly onto the bottom frame (#4).
Make sure that the higher tube on the bottom frame
(#4) is facing the front of the glider. See Figure 2.
STEP 3:
Fasten the swing bars of the arm assembly to the bottom
frame (#4) by using bolts (#8), washers (#11), and plastic
nuts (#12). Keep the bolts loose. See Figure 3.
STEP 4:
Fasten the back assembly (#6) to the seat assembly
(#5) by using bolts (#9), washers (#11), and plastic
nuts (#12). See Figure 4.
STEP 5:
Place the seat and back assembly onto the arm assembly.
See Figure 5.
STEP 6:
Fasten the seat assembly (#5) and the back assembly
(#6) to the right and left arms (#1 and #2) by using bolts
(#10) and washers (#11). Completely tighten all of the
bolts and cover them with bolt caps (#13 and #14).
See Figure 6.
FIGURE 2
FRONT
HIGHER TUBE
FIGURE 3
55
#8 BOLT M6*55
FIGURE 4
35
#9 BOLT M6*35
FIGURE 5
FIGURE 6
65
#10 BOLT M6*65
6
1
6
5
12
11
11
9
14
4
1
2
4
12 11
11 11
11
8
13
11
11
11
11
12
8
13
5
11
10
14
2
6
5
