ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL
USE INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2
V-3
KTS791F
2
1
1
1
1
1
1
1
2
7
6
8
9
4
3
PART
NO.
MATERIAL CODE
PART
Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*35
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
KTS791F-CS04-6
KTS791F-CS02-1
KTS791E-CS01-2
KTS791E-CS01-3
17C40A0712001YX
17KAA0101----Y4
17KAC3101----Y3
FIGURE 1
1
5
1
2
2
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the back assembly (#1) onto a non-abrasive surface,
such as a carpet. Insert the back assembly (#1) into the seat
assembly (#2). Fasten the middle bar on the underside of the
seat assembly (#2) to the back assembly (#1) by using bolt
(#5). Keep the bolt loose. See Figure 1.
PARTS LIST
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the bench is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
STOP DO NOT RETURN TO THE STORE!
#5 BOLT M6*15
15
BOLT M6*65
2
17C40A0722001YX
5
5
BOLT M6*15
17C40A0705001YX
