ASSEMBLY INSTRUCTIONS
KTS025G
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE!
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
4
2
4
1
1
1
1
1
2
2
2
1
1
1
8
9
10
11
12
13
14
KTS025G-CS02-1
KTS025G-CS03-1
KTS025G-CS01-2
KTS025G-CS01-3
62KTS025GH101
17C40A0705001YX
17C02A0755131YX
17C40A0714001YX
17KAB1101----Y4
17KAA0201----Y4
17KAA0101----Y4
18060103030401
18000C23001
17FA05040301-YX
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
PLASTIC WASHER d6.5*D12*10
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 6MM
NUT WRENCH 10 & 13MM
BOLT M6*40
BOLT M6*14
BOLT M6*15
CROSS BRACE
RIGHT ARM
LEFT ARM
BACK ASSEMBLY
SEAT ASSEMBLY
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the right arm (#4) onto a non-abrasive surface,
such as a carpet. Fasten the seat assembly (#1) to
arms (#3 and #4) by using bolts (#6 and #7). Keep the
bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on arms (#3 and #4)
should coincide with Figure 1 to ensure proper
assembly.
#7 BOLT M6*14
14
#6 BOLT M6*15
15
FIGURE 1
7
6
3
4
L
R
1
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
!
!
!
!
!
V-3
PAGE 1 OF 2
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP DO NOT RETURN TO THE STORE!
