Cleaning and Maintenance
• Wash frame parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do
not use bleach, acid, or other solvents on the
frame parts.
•
We recommend the use of furniture covers when
not in use.
• Please inspect and tighten all bolts or fasteners
on a regular basis to ensure proper performance
and safety of your chair.
• In order to prolong the life and beauty of your
chair, we recommend that it be stored in a dry
and protected area during off season periods.
STOP
DON’T RETURN TO STORE!
PAGE 2 OF 2
Missing A Part?
No Need To Go Back To
The Store!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
SHOULD YOU NOT LOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECT ALL
PACKING MATERIAL FOR ANY SMALL PARTS THAT MAY HAVE BECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORE RETURNING THE ITEM TO THE STORE.
PLEASE PROVIDE THE FOLLOWING INFORMATION:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT
TO THE RETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
FIGURE 2
FIGURE 3
FULL ASSEMBLY
Step 3:
Fasten the back assembly (#1) to the left and
right arms (#3 and #4) by using bolts (#7).
See Figure 3.
Step 4:
See Full Assembly.
Make sure that all of the bolts have been
tightened completely and then cover them with
bolt caps (#9 and #10).
35
6
7
10
7
10
10
1
#7 BOLT M6*35
14
#6 BOLT M6*14
2
3
4
3
4
Step 2:
At the rear of the bench, fasten both the left arm
(#3) and the right arm (#4) to the seat assembly
(#2) by using bolts (#6). Keep the bolts loose.
See Figure 2.
