DISTRIBUTED BY: TRACTOR SUPPLY COMPANY
•
200 POWELL PLACE
•
BRENTWOOD, TN 37027
•
WWW.TRACTORSUPPLY.COM
•
MADE IN U.S.A.
11
ASSEMBLY & OPERATION INSTRUCTIONS MANUAL - 30 GALLON TRAILER SPRAYER #1046832
MAINTENANCE (AFTER SPRAYING)
After use, fill the sprayer tank part way with water. Start
the sprayer, and allow the clear water to be pumped
through the plumbing system and out through the spray
nozzles.
Refill the tank about half full with plain water and use a
chemical neutralizer, such as ‘Nutra-Sol’, or equivalent,
and repeat cleaning instructions above. A mix of water
and some good quality dish detergent would be a suf-
ficient alternative.
Flush the entire sprayer with the neutralizing/cleaning
agent, then flush out one more time with plain water.
Follow the chemical manufacturer’s disposal instruc-
tions of all wash or rinsing water.
For the boom, if applicable, remove the tips and screens
from the nozzle assemblies. Wash these components
thoroughly with water or cleaning solution appropriate
for the chemical being used. Blow out the orifice clean,
and dry. If orifice remains clogged, clean it with a fine
bristle (NOT WIRE) brush, or with a toothpick. Do not
damage the orifice. Water rinse and dry tips before stor-
ing.
WINTER STORAGE
Drain all water out of your sprayer, paying special atten-
tion to the pump, handgun, and valve(s). These items
are especially prone to damage from chemicals and
freezing weather.
The sprayer should be winterized before storage by
pumping a solution of RV antifreeze through the entire
plumbing system. This antifreeze solution should remain
in the plumbing system during the winter months. When
spring time comes and you are preparing your sprayer
for the spray season, rinse the entire plumbing system
out, clearing the lines of the antifreeze solution. Proper
care and maintenance will prolong the life of your spray-
er.
