3
1
Attach right leg C and left leg D to the seat A,
then insert bolt #2 with washers #3 & nut #5 by
P.02
2
Attach wood salt H to right leg C and left leg
D, insert the screws #6 by using phillips head
screwdriver #9 to tighten, as shown in the
diagram.
H
3
5
8
A
C
D
6
9
C
D
6
9
G
B
4
1
7
B
A
2
7
3
4
using Hexagonal wrench #7 and Y wrench #8
to tighten, as shown in the diagram.
Attach middle back bar G to back support B,
then insert the screws #6 by using phillips
head screwdriver #9 to tighten, as shown in the
diagram.
Attach the bottom bar of back support B ( as the
step 3 previous assembled part ) to the back bolt
hole of seat A, then insert bolts #1 with washer #4
by using Hexagonal wrench #7 to tighten, as
shown in the diagram.
