STEP 3
Attach the main frame to the rear plate
assembly using the (4) rear plate bolts,
(8)washers and rear plate nuts.
Tighten securely.
STEP 4
Place one 10” tire onto the axle of the rear
plate assembly. Place a washer on the axle
and insert cotter pin into the end of the axle.
Duplicate this step for the left side tire.
STEP 5
Assemble the seat by loosening the 3/8” hex
head bolts, washers, and nuts and inserting
the seat onto the main frame assembly. The
seat height can be adjusted by simply mov-
ing the seat up or down to the desired
height. Once at the proper height, simply
tighten the hex head nuts.
STEP 6
The seat can also be moved forward or
backward simply by taking off the nuts, and
washers and bolts holding the seat bracket.
Move the bracket forward or backward to the
desired position and re-insert the bolts and
attach the nuts.
STEP 7
The pedals are shipped attached to the cor-
rect pedal arms on the front tire. Unpack the
pedals and thread them onto the pedal
arms. Tighten completely.
STEP 8
Test the tricycle by checking all fasteners for
tightness. Roll the tricycle to check for proper wheel operation.
