3
MACHINE CONTROLS
There are three controls on this machine. The following section will explain the function of all
three controls.
MAIN POWER
The main power switch is located on the back panel below the feed table and closest to the
operator side. A 3A (slow blow) fuse is also located on the back panel opposite to the power
switch.
SPEED CONTROL
Speed control is done with a knob on the top of operator side cover. This is a variable speed
machine. To start the motor turn the knob clockwise until you reach the desired speed. To stop
the motor on the machine turn the speed pot counter clockwise.
EMERGENCY STOP
SPEED CONTROL
MAIN POWER
EMERGENCY STOP
The emergency stop is intended to be activated in the case of an emergency to stop the
machine. Press down firmly on the emergency stop to engage the feature. To reset the machine
turn the know in the direction indicated on the knob. It is recommended to test this feature at
the begining of each use. If the machine continues to run after pressing down on the switch;
stop use of the machine, turn off main power, unplug the power cord from the wall outlet
and contact technical support for help resolving the issue.
DO NOT OPERATE MACHINE IF
EMERGENCY STOP IS NOT WORKING.
Summary of Contents for Perfmaster Sprint
Page 1: ...Perfmaster Sprint 01 2016...
