9
PUMP CONTROLS
On the Operator side cover at the top on the right side is the pump switch. This switch
turns the pump on and off. Use the knobs on the pump to control the output of the
pressure and vacuum.
PULSED FEED CONTROLS
The Feed Switch is the control of a pulsed suction valve that allows the machine to fully
control the feed of the paper. This mode of operations is a much more consistent way
to run the machine. While the output speed is slower the end result is much more user
friendly feed. To use the pulse suction use the FEED switch just below the pump on/off
switch. When using the pulsed feed it is very important that the proximity sensor is
adjusted correctly. See the images below to identify the pulse sensor and position it
needs to be in.
Make sure nothing is below the proximity sensor and it is positioned between the sheet
metal and perf shaft. If this position is not correct the pulse feed will not work
and the suction valve will stay off.
Air Valve Assembly