26
TROUBLE SHOOTING
POWER DOES NOT TURN ON
1. Check circuit breaker in electrical cabinet.
2. Check outlet for power.
TRANSPORT “LOCKS UP” AFTER
OR WHILE FOLDING
1.
Check the knob setting. Increase gap.
2.
Check the belts to ensure they are still tight.
3.
Check pulleys to make sure they are securely tightened on shafts.
IN-FEED REGISTER NOT FEEDING CORRECTLY
1. Clean rollers.
2. Clean belt.
3. Make sure the paper is feeding into the belt portion of the register guide.
FOLD IS NOT STRAIGHT
1. Check that the crease is square.
2. Check In-feed register that the sheet is registering all the way over.
NOT FOLDING IN THE CORRECT LOCATION
1. Not enough pressure on rollers. Check the knob setting. Decrease Gap.
2. Make sure there is no paper stuck in the machine. Restricting the paper travel.
3. Check for paper curl. Flatten sheet before feeding.
FOLD APPEARS WEAK
1. Check the knob setting. Decrease Gap.
2. Micro adjust the crease location.
TRANSPORT DOES NOT RUN AFTER PAPER JAM
1. Clear paper jam.
2. Motor driver possibly damaged.
3. Contact Customer Service.
COUNTER NOT WORKING
1. Check the sensor.
2. Make sure the sensor is not blocked.
TONER CRACKING AFTER FOLDED
1. Check the knob setting. Increase Gap.
2. Make sure the fold position is in alignment to the crease.
PAPER JAM AT MOTORIZED DELIVERY
1. Check the position of the exit wheels.
2. Check delivery speed. Increase if necessary.
