Open the box buckles of side panels.
* The maximum PSU length is 160mm.
* The maximum PSU length is 160mm.
* Please install the vertical graphic card with the
included PCIe 16x Gen3 High-Speed Riser Card.
* Max. graphic card height is under 60mm.
After removing side panels, the top panel can
be removed.
Please push out the dowel pins from the holes on the top
of side panels and tilt the side panels 45° outward.
R
emove the base from the slots at bottom.
*Please insert the 3.5” HDD rubber mounts
in the 3.5” HDD’s hole locations, and then
install 3.5” HDD with the screws.
Removing top and side panels
Installing 2.5" SSDs /HDDs
Installing the power supply
Installing the
vertical graphic card
Installing the Mini ITX motherboard
120
140
*240
*280
120
140
Installing water cooling radiators & cooling fans
Installing the 3.5" HDD
*Please choose either of a 280mm/240mm radiator
or a 3.5" HDD to install on the top panel.
*Max. water block height is under 55mm.
1
Please remove the screws of PSU bracket.
1
Please push out the PSU bracket
from the notch.
2
Mount the screws of the PSU bracket.
3
Plug the power cord first,
and then turn on the switch.
4
2
2
3
Connector
Install with trays
(There are two SSD trays in this case. )
* Please install the 2.5" SSD first,
and then the power supply.
RIGHT
RIGHT
VERTICAL GPU
UP TO 330mm
MINI
ITX
MB
Compucase Enterprise Co.,Ltd.
No. 225, Lane 54, An Ho Road Sec. 2 Tainan, Taiwan, R.O.C
Tel:+886-6-356-0606
Service E-Mail:[email protected]
COUGAR USA Technical Service
Tel: (833) 256-3778
Mail: [email protected]
https://cougargaming.com/support/contact/upload/
For more information, please visit
Compucase Enterprise Co.,Ltd.
All rights reserved.
www.cougargaming.com
Made in China
LEFT
"Power ON"
RIGHT
LEFT
TOP
3.5" HDD
1
BACK
2
FRONT
2-1
2-2