Installing a power supply
120
240
120
(Top)
1
120
240
120
(Right Side)
2
Installing water cooling radiators & cooling fans
Installing an motherboard
Installing tempered glass columns for extending case width
Installing an internal 2.5" HDD/SSD
Installing an internal 3.5" HDD
2
1
2
1
1
2
2
RIGHT
Mini-ITX
Micro ATX
ATX
Supports Mini ITX, Micro ATX, and
ATX motherboards.
2
Align the 3.5" HDD with the rubber screws
that correspond with the mounting holes at
the back of the front panel.
3
Slide the 3.5" HDD in the direction of the arrow.
1
Please install 3.5" HDD step screws on 3.5" HDD screw rubbers.
Please use PSU bracket M when you install Micro ATX
or Mini ITX motherboards.
Please remove the water cooling reservoir/pump stand first.
Then, use PSU bracket A when you install ATX motherboard.
FRONT
FRONT
RIGHT
AT THE BACK OF THE FRONT PANEL
1
1
3
2
2
3
X 12
3.5" HDD screw rubbers
X 12
3.5" HDD step screws
RIGHT
X 4
Tempered glass columns-A
(For extending case width)
Tempered glass column-B
(For extending case width)
X 1
A
B
Max. PSU Length 160 (mm) / 6.3 (in)
For Micro ATX and Mini ITX
motherboards
For ATX motherboard
Max. PSU Length 140 (mm) / 5.5 (in)
B
A
If the GPU height or CPU cooler height is higher than the original left tempered
glass panel, please change tempered glass columns to extend the case width.
Install the tempered glass columns A
and B to extend the case width.
Please remove the original tempered glass
columns first.
Connectors
Connectors
Connectors
1
1
A
B
A
B
2
AT THE BACK OF THE FRONT PANEL
RIGHT
3
1
M
A
1
Please install 2.5" SSD step screws on 2.5" SSD screw rubbers.
X 8
2.5" SSD screw rubbers
for the right panel
X 8
2.5" SSD step screws
for the right panel
3
Slide the 2.5" SSD in the direction of the arrow.
2
Align the 2.5" SSD with the rubber screws that correspond
with the mounting holes at the back of the right panel.
Connectors
