Page 2
Operation:
1. Extend outriggers and lock with pins provided.
2. Screw jacks down to contact floor and remove weight from casters.
3. Make sure THE MAXI-LIFT
®
is situated in proper position on a level, firm
base.
4. Outrigger jacks must be screwed down into contact with floor surface.
NOTE: DO NOT LIFT WHEELS OFF OF FLOOR SURFACE!
5.
DO NOT use on incline.
A level indicator is provided below the winch on The
Maxi-Lift
®
frame. If unit is not level, re-position unit until level is indicated.
6. Raise safety cage and lock in place.
7. Crank platform to desired height and then climb to platform and close gate.
8. To lower, disengage safety dog and turn the hand-crank in the opposite direction.
The safety dog must be engaged while elevating and at all times while platform is
occupied.
9. To move The Maxi-Lift
®
, lower platform and cage, crank up jacks and slide
outriggers in.
Maintenance:
Apply light oil as necessary to:
1. Screw jacks.
2. Cable pulleys.
3. Cage Pivots and Lock Bolts.
4. Gate Hinge and Latch.
5. Winch Bearings (
DO NOT
allow oil to contact brake pad).
Apply light grease as necessary to:
1. Contact points in column assembly.
2. Winch gears (
DO NOT
allow grease to contact brake pad).
3. Caster axles (using grease gun).
Check and adjust or replace the following as necessary:
1. Worn lift cables.
2. Cable pulley bearings.
3. Winch brake disc.
Replace damaged or worn components prior to use.
Refer to following figures and component part listings when ordering replacement parts.
Contact company for pricing and availability.
Please have following information ready for parts and technical support:
1. THE MAXI-LIFT
®
Model Number and Serial Number.
2. Part Description and Part Number.
