Coto baby SALSA PRO, User Manual

Page: 24 / 52

GB
17
INSTALLATION
Adjusting the height of the shoulder belts.
a) The correct height of the shoulder belts is attained when the belt
disappears into the shell slightly above the shoulder of the child. Ensure that the
shoulder belts fit comfortably over the child ’ s shoulde r . (F15)
b) Loosen the shoulder belts by pressing the release button of the adjuster
and pulling the shoulder belts towards you as far as possible. Do not pull the belt
pads when doing so.(F9)
c) Place t he shell o f the seat in t he s leeping pos i t ion .
d) Remov e t he s houlder belts from t he y oke. ( F 16-a) .
e) Pull the shoulder belts through the belt pads and belting slots in shell, ensuring
that the buckle remains fixed to prevent the belts being twisted.(F17)
f) If you want to alter the belts from or to the lowest positions, adjust the car
seat to the sleeping position.
g) If you want to alter the belts from or to the higher positions, adjust the car seat to
the sitting position.
h) Place the shoulder pads at the expected height and thread the shoulder straps
back through the shoulder pads, cover and shell. (F18)
I) Connect the shoulder belts to the belt yoke. (F19-a)