FG1066-IP(1S)SP
Installation
1. Unpack the box and check for the following items:
a. Main telephone body c/w base unit
b. Handset
c. Handset cord
d. RJ45 Line cord
2. Connect the handset to the base unit using the coiled handset cord provided
3. Connect one end of the line cord to the RJ45 socket at the base unit, and the other end
to the wall Ethernet outlet
4. Install the faceplate (if delivered separately) onto the telephone
Call Operation
A. Initiating a Call
1. Lift the handset.
2. Listen to dial tone.
3. Press the desired number on the keypad and wait for 5 second or press “#” to dial out.
4. To end the call, place the handset back on the cradle in the base unit.
B. Answering a Call
An audible ringing sound and the flashing LED indicates the incoming call.
1. Lift up the handset to answer the call.
2. To end the call, place the handset back on the cradle. The LED will turn off.
C. Redial
Using the handset
1. Lift up the handset, press the REDIAL button to initial a redial call.
2. To end the call, place the handset back on the cradle.
D. Speakerphone Volume
Adjust the Vol+ or Vol- button to increase or decrease the speakerphone volume.
Alternatively, go on to the Web Portal, go to Phone Settings page and adjust the volume
settings (see next page).
E. Ringer Volume
Go on to the Web Portal, go to Phone Settings page and adjust the volume
settings (see next page).
