7
EN
G
LI
SH
Setting the time and day
1. Set the main power switch (A) to [ I ] to switch the panel heater on.
2. Wait until the power cut alarm has emitted 10 signals or press [
] (F) 2 times.
3. Press [ PROG ] – the number representing the day
of the week will flash.
-
Press [
] or [
] to set the desired day,
e.g. 3 for Wednesday.
4. Press [ PROG ] – the digits to the left of the colon
will flash.
-
Press [
] or [
] to set the hour, e.g. 07.
5. Press [ PROG ] – the digits to the right of the colon
will flash.
-
Press [
] or [
] to set the minutes, e.g. 34.
6. Press [ PROG ] to complete the setting. You have
now set the time and day as 07.34 on Wednesday.
Note:
If no button is pressed for 10 seconds,
the setting will be saved automatically.
