Costway TY580402, User Manual

Page: 4 / 31

7
www.costway.com
STEP 5
STEP 6
STEP 7
STEP 8
5. Install EVA Bumpers into both ends of the Player Teams, and then pass the teams with the
same uniform through the Side Panel holes at intervals. (As shown in the figure)
6. Pass the other end of the Player Teams through the corresponding holes of the other Side
Panel, aligning the screw holes and locking the screws. Put the Hand Grip and Safety End Cap
on both ends of the Player Team, and when in place, lock the Handle Grip with screws. (As
shown in the figure)
7. Turn the table over, align the slanted Le�/Right Leg and screw holes of the table from the
inside, then �ghten the screws, but not too �ght.
8. Install the built-in Nut(#24) on the Cross Bar of the table legs, then align with the screw
holes on the slanted legs on both sides and �ghten the screws.