Assemble Dash board
Insert the dash board into the
holes on vehicle.
Assemble Rear Armrest
Insert the rear armrest into the holes
on vehicle.
The light of the line on the right body
through the armrest.
Assemble Rear roll bar
Insert the holder to alarm lamp, then
insert the four feet to car body.
Final,use 2 pcs 4*12 machine screw
to lock it.
CAUTIONI: Before assemble
the holder, connect the alarm
lamp wire with car body wire.
Assembling seat
Cushion before installa
ti
on.
fi
rst connect
the ba
tt
ery of car body line,at the same
ti
me,the line on the gear box and
automobile body line connec
tio
n.Insert
the tabs at the back of the seat into the
slots in the vehicle body.
Insert two M4*12 Machine screws,and
ti
ghten with a screwdriver.
8
www.costway.com
9
www.costway.com
Assemble of steering wheel
Screw o
ff
the nut from the steering
wheel.Insert the steering wheel
onto the end of the steering
column.Pay a
tt
en
ti
on to the
steering wheel front and back.
With 4*12 screws 2 to around the
escape-pipe whick the body in turn.
Assemble real driving wheel
First the gear case onto the rear axle.
Connect the cable of the motor and the cable of the car.
Slide the driving wheel onto the rear axle. Make sure the driving wheel inserts onto the
pins in the gear case.
Slide the
Φ
11 washer onto the rear axle.Fasten locked by a spanner,lastly insert a
decora
tio
n cover into the wheel cover.
Assemble Escape-pipe
Will escape-pipe bracket hole and car
body on the corresponding feet
fi
t
well. Than with 4*12 self-tapping
fi
xed.
