a. Loosen PULL PIN KNOB (28)
and pull out, insert Seat Post (5)
into the rear opening tube of
the Main Frame (1). Adjust the
Seat Post (5) to your desired
height, then tighten the PULL
PIN KNOB (28).
b. Place Seat Slider (8) onto Seat
Post (5), then fix them with
WASHER 10 (31) and
OCTAGONAL KNOB (27).
c. Place Seat (9) onto Seat
Slider (8), secure seat by
tightening the seat locking nuts
(Pre-fitting on the Seat).
Φ
a. Insert Handlebar Post (6)
into the front opening tube
of the Main Frame (1).
Tighten PULL PIN KNOB (28)
and Fixing Knob (45).
b. Attach Handlebar (7) onto
Handlebar Post (6) with
4 sets of M8 SCREW (41).
Then place the Phone Holder
(10) on Handlebar (7),
and press it down.
Summary of Contents for SP36172
