2
FIG.1
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Soccer Table. The table will be assembled upside down
and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will
require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list. Care-
fully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
3. Attach one Goal End Board (#2) to one Top Slat Board (#3) using three “L” Brackets (#30) and twelve Screws
(#11) as shown in FIG.1.
4. Repeat the step above for the other Goal End Board (#2) and Top Slat Board (#3).
FIG. 1
FIG.2
5. Attach the pre-assembled Goal End Boards and Top Slat Boards (#2 & #3) to the Side Aprons (#4) using eight
Screws (#17).
FIG. 2
2
30
11
3
2
2
17
4
4
37
