Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
E
B
A
x2
C
D
F
● 50% Tighten before fixing all screws, Allen wrench is recommended
instead of an electric drill.
● Place the item on a flat ground to adjust and make sure it remains
stable.
● Tighten up all screws with tools gradually.
● If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly
process.
● If the item is not stable, please loosen all the screws, adjust it on a
flat ground and tighten up all screws again.
● Note: If one or some screws are fully tightened during assembly,
chances are the others will not be aligned with holes. In addition,
all the holes are designed to be relatively larger to provide more
space for the adjustment of the screws.
Notice
02
03
