Installation process
Hanging on the Tree
Note:
You should choose branches with a diameter
greater than 10” (25cm) to hang the swing hammock.
To ensure safety, please make sure that the
adjustment rope is installed correctly after hanging,
and then an adult must test its firmness by pulling
down the swing hammock. In addition, the distance
between the bottom of the swing and the ground
should be controlled between 12”-18” (30cm-45cm).
1.Use a pencil to mark
the locations that need
to be punched. (Cannot
be installed to the
ceiling, hollow wall)
2.Use a 12MM drill bit
and use an Impact drill
to make holes. The
depth of the hole is not
less than the length of
the expansion screw.
3.Install the expansion
screws correctly as
shown in the figure.
4.Insert the expansion
screw into the hole,
screw it in gently with a
tool, and finally tighten
the nut with maximum
force.
04
05
