Step1:
Hold up the arm and loosen the screw(1&2) Don't loosen the
screw directly without holding the arm up.
a b
3
C2
Step2:
Keep holding up the arm(C2)by your hand and adjust the screw(3)
If you turn the screw in the direction of arrow a, the angle of the awning
will go down.
If you turn the screw in the direction of arrow b, the angle of the awning
will rise upward.
After adjusting the screw3, please check if the awning has been adjusted to
the proper angle,if not,please repeat the above installation steps 2 until the
angle is suitable.
Step3:
Don't forget to tighten the screws(1&2) after adjusting the inclination
of the awning.
If you don’t tighten the screw(1&2), the screw 3 will be damaged soon.
2
2
