02
03
DO NOT fully tighten the
bolts & Nuts until the log
rack is completely
assembled!
CAUTION:
Do not load storage rack until
fully assembled on a flat, level
surface. Your firewood should
be loaded and unloaded evenly
for proper weight distribution.
If the load is unbalanced, the
rack could tip over and cause
injury .
Keep this product clean by
using a damp cloth. Do not use
abrasive cleaners, as it will
cause parts to tarnish or rust.
INSTRUCTIONS:
1)Remove all contents from packaging. Make sure all of your
parts are present.
2)Align the holes in the end supports (A) with the holes in
the base supports (B).
3)Secure into place by threading a bolt (C) through the end
support (A) and the base support (B), the support rod (E).
Attach a nut (D) (Loosely) to the end of each bolt (C).
4)Repeat steps 2 & 3 for the other side of the log rack.
5)Align the holes from the base supports (In the middle of
the log rack) to each other
6)Secure the base supports together by threading a bolt (C)
through the two base supports. Attach a nut (D) (Loosely) to
the end of each bolt (C).
7)Repeat steps 5 & 6 for the other side of the log rack.
Tighten all bolt and nut connections. Your Firewood Storage
Rack is now ready for loading.
PARTS LIST
Part#
A
B
C
D
E
F
Description
End Supports
Base Supports
Bolts
Nuts
Support rod
Cover
QTY
2
4
14
14
3
1
(A)
(C)
(D)
(C)
(D)
(B)
(E)
(F)
