EN
EN
'Let's care for the environment!'
The wheelie bin symbol indicates that the product must not be disposed of
with other household waste. Please use designated collection points or
recycling facilities when disposing of the item.
Please keep this manual as it contains important information.
WARNING: Repair patches must be applied by an adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTION:
• As an outdoor product, the water park is subject to wear and deterioration. Inspect
for signs of fabric failure; weak or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the water park or blower using a dry cloth or a cloth
dampened with a neutral, noninflammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before rolling up.
• Disassemble and dispose of the equipment in such a manner that no hazardous
conditions exist at the time the equipment is discarded.
• Blower should be returned to a collection center
Compress air out as you
are rolling up the
product inflatable
Fold over only
1
2
3
1. Deflate the item, clean the area and allow to dry thoroughly.
2. Cut a portion of the patch to the size needed and round the corners. (See Fig).
3. Remove the adhesive backing from the patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
STORAGE
REPAIR PATCH INSTRUCTIONS
INSTRUCTIONS FOR WATER PARK
MAINTENANCE
DISPOSAL
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by
qualified persons in order to avoid a hazard
• Product should be periodically examined for potential
unsafe conditions such as damaged cord, plug,
housing, or parts, and that in the even such damage is found, the product should not
be used until properly repaired. If these checks are not carried out, the product could
overturn or otherwise become a hazard.
• The blower does not require any lubrication and has no user serviceable parts. Do
not attempt to service the blower.
• Do not immerse the blower in water. To clean, wipe with a damp cloth.
• Regularly check the intake and output openings and keep free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffic areas, water or damp areas.
• The blower is a high volume blower, and is capable of moving large volumes of air
very quickly. Place the blower in an area where it will not draw in dirt or leaves.
INSTRUCTIONS FOR BLOWER
MAINTENANCE
CORRECT
INCORRECT
OR
14
15
