TAKE DOWN
MAINTENANCE
06
■
Make sure all children exit the product.
■
Makes sure the product is free from foreign objects.
■
If there is water inside the seams after using the water pool
keep the air blower at work for about 30 minutes to dry that
out before packing.
■
Turn the blower(air pump) power switch to OFF.
■
Unplug the blower(air pump) power cord.
■
Loosen the hook and loop fastener and detach the inflation
tube from the blower. The product should deflate on its own
within 5 minutes.Make sure the product is entirely deflated.
(refer to picture F) Remove ground support stakes.
■
Fold the product in half from both ends, and then fold it in
half 2 more times from both sides,vertically to the first
fold.(refer to picture G,H,I)
Roll it up tightly from the end opposite the inflation tube.
(refer to picture J,K)
■
Slip the carry bag over the folded product and stakes
(plastic balls or water bags ). Zip the bag.(refer to picture L)
• Checks and maintenance of the main parts of the toys should be carried out of
regular intervals, if these checks are not carried out, the toys could overturn or
otherwise become a hazard. Whenever practical, the instructions shall also be
affixed to the toy.
• The seasonal inspection and maintenance should be conducted for any damage
or leakage of the product.
• The product can be wiped clean with a mild detergent. Keep water away from
the blower(air pump) at all times.
• Do not store the product when wet. Store the product and the blower indoors in
dry conditions when not in use.
EN
