The playing of music in a library
1. find the music to be played in the library list and record its number.
2. press the key of "DEMO" to enter the mode of demonstration song.
3. select the song by selecting the "+" "-" key Number (000-079)
4. Press the DEMO key or start / stop the key to stop playing to exit this
mode.
The music will continue to play in order until you stop it.
The use of keyboard strength tactile function
When the keyboard of this product is opened for the strength tactile keyboard
"strength" function, the relative volume of the electronic output music will vary
according to the intensity that the keyboard is pressed, and can play
music with different volume and different feelings.
1. press the strength TOUCH button, and the strength touch function is
activated.
2. press "TOUCH" again and turn off the tactile function.
When booting, it is automatically in the state of starting the strength tactile
function.
The use of keyboard Drum instrument function
Press the "Drum" button, switch the keyboard of the digital piano to the drum
key board, press the DRUM button again, and turn off the function.
The use of Dual Voice function
When using the Dual Voice function to play the keyboard, you can emit two
different timbre at the same time, showing the resonance effect of the two
musical instruments.
How to use Dual Voice function
1. first enter the timbre mode, choose a musical instrument as the main
timbre.
2. press the "DUAL" button to enter the second timbre selection mode.
3. use the "+/-" button to select a musical instrument as the second timbre.
The use of keyboard split function
Using the keyboard split function, you can assign two different timbre (main
tone and split tone) to both ends of the keyboard, so that you can play one
timbre with your left hand and another with your right hand to play an
ensemble effect.
Use of metronome function
Press the "metronome" button, the metronome function is activated, you can
follow the beat sound to play. Press the metronome button again, and the
metronome function is turned off.
Please use the “Tempo” button to set the speed.
Recording
1. Press the recording key to enter recording mode.
2. The maximum number of recordings is 250, and when the recording is full,
there will be no room for new recording.
3. Each time you press this key, you erase the last memory, and re-enter
recording mode.
Play sound
1. Press the PLAY key to play the recorded notes and drums, and play them
in the timbre selected for the recording at that time
2. Press the PLAY key, and if there is no previous memory value, no action
occurs.
Transpose effect control
1. Press the "Transpose" key to enter the transposition control mode, and
then press the "+" and "-" keys to set the range of transposition.
2. There are 13 segments (-6-+6) for the transposition control, and the
power-on preset value is in the seventh segment.
3. In the transposition mode, press the "+" and "-" keys for more than one
second to continuously increase/decrease the transposition.
MP3 function
1. Connect to the U disk and go directly into MP3 mode.
2. Select songs from MP3. Press the "+" "-" key to select the song.
3. Press the start / stop key to start and pause playback.
Left keyboard
Right keyboard
08
09
