12
www.costway.com
13
www.costway.com
Figure 13.
Installing the pocket jointing fence.
Figure 14.
Securing the fence to the main table.
3.
Slide the pocket jointing fence into the slot in
the face of the main fence as shown in
Figure 13
.
4.
Secure the pocket jointing fence to the main
fence with the supplied M8-1.0 x 20 hex bolt
and the M8-1.0 threaded knob.
5.
Place the fence assembly on the main table.
6.
Align the slots on the fence assembly over
the slots on the table surface.
7.
Secure the fence assembly to the table with
the supplied M8-1.0 x 40 hex bolts and the
M8-1.0 threaded knobs as shown in
Figure
14
.
Figure 15.
Securing the power switch
to the main table.
2.
Flip the table assembly top-side up
.
To attach the power switch to the main table:
1.
Secure the power switch to the main table
with the supplied #10-32 x
3 4
" truss head
phillips screws and the #10-32 keps nuts as
shown in
Figure 15
.
Note—The power switch
mounting bracket should be on the inside of
the main table edge.
Figure 16.
Router table mounting holes.
Figure 17.
Miter gauge components.
Figure 18.
Assembled miter gauge.
To secure the router table to a workbench:
The bottom of each leg has two holes (
Figure 16
)
used for mounting the router table to the work-
bench. Secure the router table to the workbench
with wood screws and washers.
To assemble the miter gauge (Figure 17 & 18):
1.
Attach the miter body to the miter bar with the
supplied M4 x 12 tap screw.
2.
Place the M8 flat washer over the M8-1.0 x
12 knob bolt.
3.
Slide the M8-1.0 x 12 knob bolt through the
miter body slot and thread it into the miter
bar.
Tap Screw
Miter Body
Knob Bolt
Miter Bar
Flat Washer
