Notice:
1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other screws to
50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten
up all screws again.
6. Note : If one or some screws are fully tightened during assembly, chances are the others will
not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide
more space for the adjustment of the screws.
Summary of Contents for HW66722
Page 7: ......
